Skip to main content
Headpressure & purge control

Steady head pressure. Repeatable purges. No hydrostatic maths.

The PacWizz is your packaging pal: an automated controller that holds brite tank head pressure steady through packaging, then purges your next tank to the same oxygen target every time.

The PacWizz controller mounted in a brewhouse, showing its display and up, down and enter buttons
<1% O₂ Oxygen in the tank before transfer, from the default five-cycle purge
15 psi Default fill pressure, adjustable on the fly with the up and down buttons
30 psi Foot sensor range, including the hydrostatic pressure of the liquid
24 VDC Low-voltage supply, 24 W max, UL 61010 certified for North America
Why brewers use it

Key PacWizz benefits

Take the guesswork out of managing tank pressure during packaging, and turn purging into a procedure you design once and repeat exactly.

Stable fill levels

Fast gas replacement keeps head pressure steady while you package, so fill levels vary less and you waste less packaging and product.

No hydrostatic calculations

The foot pressure sensor reads the real pressure at the bottom of the brite, and the PacWizz works out when to add gas.

Repeatable purging

Design your purge procedure once. The PacWizz does the dilution maths and repeats it exactly the same way every time.

Built-in leak check

Finish every purge with a pressure test that confirms the brite was assembled correctly and is holding pressure.

Any purge gas

Use CO₂, N₂ or a beer gas blend. The dilution maths is the same whichever you run.

Vents outside

Purge gas can be piped outside the building, and the enclosure hangs off the CIP arm or mounts on the wall.

Two modes

Two jobs, one controller

Foot setup: brite hose at the CIP arm, foot pressure sensor between two valves at the bottom of the briteBrite tankPPacWizzTo the packaging line

Packaging mode

Pick Packaging on the Mode Selection screen, set your fill pressure and the PacWizz adds gas to the headspace as the level drops. Connect at the CIP arm for speed, or at the foot of the brite to compensate for hydrostatic pressure.

Packaging setup
Tank purge: gas enters at the foot valve and the RMB on the CIP arm vents purge gas through a hose to outsideBrite tankPRMBPacWizz

Tank purge mode

Set the purge, vent and finish pressures and the number of cycles. The PacWizz calculates the oxygen left after each cycle, runs the sequence, then holds the finish pressure so you can check the tank for leaks.

Purging setup
The dilution method

From 21% oxygen to under 1% in five cycles

Each cycle fills the tank to the purge pressure and vents it back down, diluting the air that is left. With the PacWizz defaults (purge to 15 psi, vent to 3 psi, finish at 9.25 psi) five cycles take a tank from air to 0.99% O₂.

The calculated oxygen value is on screen before you press start, so you know what you will get before you spend the gas.

How purging works
Made by BrewWizz

From the team behind the FizzWizz

The FizzWizz brought hands-off, automated carbonation to craft brewers. The PacWizz takes the same approach to packaging and purging: set it up once, and it repeats the job exactly, every time.

Both are designed by BrewWizz in Nova Scotia and built, assembled and tested by Allendale Electronics in Lockeport. When you call, you talk to the people who built it.

Meet the FizzWizz

Built in Nova Scotia

Designed, assembled and tested in Lockeport by Allendale Electronics.

Certified for North America

NRTL inspected and UL 61010 certified, with CE EMC compliance.

Serviceable by you

A modular design you can maintain yourself, backed by a 1-year parts and labour warranty.

Talk to the builders

Email the Wizz Team, or Contact Us to request a callback.

Order

Choose your PacWizz

Both versions run packaging mode. The purging version adds the remote motorized ball valve that vents purge gas, ideally to the outside of the building.

Packaging

PacWizz

Starting at $3600 CAD

(Approx. $2550 USD)

  • Main enclosure with display, pushbuttons and quick connections for CO₂ source and supply
  • Foot Pressure Sensor: 316 stainless, 1½" tri-clamp, reads liquid or gas
  • 10 ft Brite Hose, 5/16" push to connect, NSF-61 approved
  • Dual CO₂-in connector, so two regulators can feed the PacWizz
  • Tri-clamp tee fitting for the arm or foot setup
Request a quote
Packaging + purging

PacWizz purging version

Starting at $3844 CAD

(Approx. $2675 USD)

  • Everything in the PacWizz packaging kit
  • Remote Motorized Ball-valve (RMB) with 1½" tri-clamp fitting
  • Automated tank purge mode with on-screen O₂ calculation
  • Finish pressure hold for a tank leak integrity check
  • Vent purge gas outside through a permanently mounted RMB
Request a quote

Want to chat about bubbles?

Call 1 902 874 1348 and ask for the Wizz team, or email [email protected]. We are on WhatsApp too.